It might seem like a never-ending job to clean your dirty kitchen or bathroom floors. The best Tile Floor Cleaners can help by deep cleaning your floors (2023)

FAQs

What is the best product to deep clean tile floors? ›

For ceramic tile floors, porcelain and other similar tile surfaces, the best way to clean is to use bleach, ammonia and other acidic cleaners like calcium lime rust. For natural alternatives, sodium bicarbonate powder and hydrogen peroxide, vinegar, and citric acids are your best choices.

To deep clean tile floors and walls to rid them of soap scum residue, spritz tiled floors and shower walls with surface cleaner, then apply or turn on hot water for five minutes until steam builds. Wait 20 minutes and wipe off the tiles with a cloth.

Combine 1/2 cup water, 1/2 cup dishwashing detergent, 1-2/3 cups baking soda, and 2 tablespoons distilled white vinegar. Stir the mixture until everything is dissolved. Pour it into a spray bottle. Wash flooring in small sections by spraying on, mopping off, then rinsing thoroughly with warm water.

The best way to clean your kitchen floors is with castile soap, an olive-oil-based cleaner that can remove stubborn stains and, when added to warm water, serves as an especially effective cleaner for hardwood and tile floors.

For a deep clean, probably every week or so, mix 6-7 drops of a mild detergent (dish soap is usually fine) with one gallon of warm or hot water. Use the mixture to dampen a mop, and clean the floor in sections. Make sure the mop is damp and not dripping wet, since standing water can damage linoleum.

For stubborn shower stains, soap scum and grime, mix one cup of warm water, two cups of white vinegar and one teaspoon of a vegetable-based dishwashing soap in a spray bottle. Spray the solution on the shower walls, let it work for 15 minutes and use a sponge to scrub off scum and grime.

Try mixing white wine vinegar with either water or baking soda. The acid within the vinegar helps to break down the mineral deposits that build up within hard water stains and limescale, whilst the baking soda helps to dissolve these stains to leave tiles sparkling clean.

Add 1/4 cup vinegar and 1 tablespoon dish soap; mix until suds form. Submerge a rag into the mixture and wring away excess water. Rinse the rag between passes.

Can I use Dawn to wash my kitchen floor? ›

26. Mop up dirty vinyl, linoleum, or tile floors. You can mop these types of floors with a simple solution of one to two tablespoons of Dawn and a gallon of warm water. Your floor will look good in no time!

Whether you believe it or not, most professionals use a solution of white vinegar and water with a 1:1 ratio. This solution is often more effective than dedicated Ph-neutral grout cleaners.

Avoid Using Too Much Soap

Soap only lifts dirt and oil into water, making them suspend in water. Therefore, the more soap you use, the more your mop gets saturated with dirt. So, if you do not remove all the soapy water from the floor, the dirt remains, forming streaks on the floor.

Mop around the edges first, then move to the middle of the floor, using overlapping, figure-eight strokes. When one side of the mop gets dirty, turn the mop over to the clean side. When both sides are dirty, wash the mop in the bucket; otherwise, you'll be spreading dirt around instead of removing it.

Water + Vinegar + Dish Soap + Rubbing Alcohol

The rubbing alcohol, for example, helps speed up evaporation time to avoid floor streaks and also helps both disinfect and degrease the floors, while dish soap will dissolve the bond between the dirt and floor while it degreases and cleans.

Auto-scrubbers are the workhorse of the janitorial industry. They take the place of wet mopping large buildings, doing the daily task of removing soil to keep floors clean.

After trying different commercial cleaners, we decided to mix one part Dawn dish soap and to two parts white vinegar, which I had on hand, in a bucket and mopped the floor with the soapy mixture. How it actually worked: The combo was a winner and brought the floor (almost) back to its original glory.

The only vinegar that works for cleaning floors is distilled white vinegar. The simple kind. It has an acidity of 5 percent which is perfect for cutting through grease, grime, and dirt. It is also cheap enough that you can use tonnes of it in cleaning all your surfaces, and still not break the bank or your budget.

Combine about a cup of white vinegar with a gallon of water, and get to work. You can either mop or clean by hand. When scrubbing, get rid of hard-to-remove grime with a baking soda paste. Baking soda acts as a scouring solution and can get under deeply set dirt buildups.

A quick once-over with a cloth sprayed with WD-40 is great for removing soap scum from shower doors and can also prevent mildew from returning. It's also a great way to clean the grout between your bathroom tiles, remove stubborn stains from your toilet bowl, and rust stains on porcelain caused from aerosol cans.

What is the best DIY to clean tile? ›

Combine equal parts white vinegar, rubbing alcohol and water, and then add ½ tsp. of liquid dish soap and a few drops of peppermint essential oils. This works well whether you use a bucket or spray bottle to dispense onto your floor as you mop. As an added bonus, peppermint oil deters ants and mice!

You can safely use vinegar to clean ceramic or porcelain tiles, whether they are glazed or unglazed. For other types, however, like terracotta, marble or grante, we recommend you look for ph neutral cleaner that will not harm the material.

One safe bet is to mix together ½ cup rubbing alcohol, ½ cup vinegar, a few drops of dish detergent, and 2 gallons of water. The alcohol cuts through the really tough stains, while the detergent helps remove grease and residue. Mop the entire floor, then rinse with fresh water, if it seems necessary.

Floor Cleaning Tips

For small spills, try Clorox® Disinfecting Wipes. They even work on wood floors! For a deeper clean, vacuum or sweep the floor before mopping to remove the excess dirt, crumbs and other floor-dwelling particles.

This match made in heaven has been a household staple for a long time and I make sure to keep it handy. To make the solution is simple and easy on the wallet! Pour equal parts of vinegar and Dawn into a spray bottle. Gently shake, then spray liberally onto the surface to be cleaned.

Vinegar's power to clean lies in its acidity. With a pH around 2.5, vinegar is effective at dissolving grime and mineral deposits like hard water and rust stains.

Light dust and soils on a hard floor surface can very effectively be removed with water only. Heavier soils, sticky syrupy soils, petroleum based soils, kitchen areas and restrooms typically require more than water and there are specially designed chemicals for these.

Mix some vinegar and baking soda together to form a paste. Scrub this paste on the floors well, especially the grout. Leave it on for 10 minutes and wipe clean. Then mop the floors with a mixture of hot water and dish soap.

Generally, ceramic tile cleaning is straightforward. You can use most cleaning sprays to clean the surface. Mix a few drops of dish soap in warm soapy water in a bucket, then mop up the grime. Make sure to change the water frequently as to prevent dirty water re-soiling the clean tile.

Why is my tile floor still dirty after mopping? ›

Avoid Using Too Much Soap

Soap only lifts dirt and oil into water, making them suspend in water. Therefore, the more soap you use, the more your mop gets saturated with dirt. So, if you do not remove all the soapy water from the floor, the dirt remains, forming streaks on the floor.

Wiping the tiles with a premade solution of 10% bleach and 90% water should remove most of the mold (source). For particularly tough stains, try mixing a solution of 25% bleach and 75% baking soda in a cup. Always test the solution on a small section of your ceramic tile before you tackle the mold (source).

Getting in between the tiles is hard but OxiClean™ can make keeping your grout sparkling white easy. It's a great bathroom cleaner and grout cleanser.

Mop up dirty vinyl, linoleum, or tile floors.

You can mop these types of floors with a simple solution of one to two tablespoons of Dawn and a gallon of warm water. Your floor will look good in no time!

Tile cleaner

If you'd like one product that cleans everything in your bathroom, the famous blue bottle of window cleaner might just be it. Windex can also be used to clean tiles and grout, without causing any damage.

Your bathroom's or kitchen's tiled floors will love a vinegar wash. Put half a cup of vinegar into one gallon of warm water, and away you go. Swish, swish, swish away all the germs, dirt, and grime.